Using the roller threshing device for threshing fiber flax
https://doi.org/10.26898/0370-8799-2020-6-13
Abstract
The ways of increasing efficiency of the factory technology for harvesting fiber flax with threshing stem band from the rolls were studied. The experiment was carried out in stationary conditions with a moisture content of the source material of no more than 16%. A roller threshing device was proposed for separating the seed part of the crop from the stem before feeding stems into the fiber production line. The device ensures threshing of the fiber flax stem band over its entire width without using a separate clamping conveyor. The places where the seed heap descends from the roller threshing device while threshing flax stem band were identified. Quality indicators of the roller threshing device operation were obtained ensuring 100% threshing of the fiber flax band with a band compression force between the rollers of 16 kN. With this method of threshing, damage and crushing of seeds were not noted, the stems were evenly flattened along their entire length. Fractional composition of the threshed heap was determined during threshing of a fiber flax stem band between the rolls of the laboratory sample of a three-roll threshing device: loose seeds (50%), shells of capsules with fruitstalks (47), capsules with seeds (3), heap of leaves and stems (less than 1%). The results of the study in stationary conditions showed the expediency of using roller working bodies to separate the seed part of the crop from the stem part for the technical support of the factory technology for harvesting fiber flax. The use of roller working bodies in the design of threshing devices without a separate clamping conveyor allows to increase the quality and quantity of flax products obtained both in seeds and in fiber due to the improvement of the process of gentle flattening of the stem band between the rollers along its entire width. The concept of this roller threshing device is advisable to use when designing trailers and travelling flax harvesting machines for the implementation of a separate technology for harvesting fiber flax.
About the Author
Yu. V. Burlakov
Siberian Federal Scientific Center of Agro-Bio Technologies of the Russian Academy of Sciences
Russian Federation
Russian Federation
Senior Researcher
PO Box 463, SFSCA RAS, Krasnoobsk, Novosibirsk Region, 630501
References
1. Pozdnyakov B.A. Up-to-date areas of improving the systems of machines for harvesting fiber flax. Tekhnika i oborudovanie dlya sela = The Machinery and Equipment for Rural Area, 2019, no. 8, pp. 2–6. (In Russian).
2. Sutygin P.F., Shumkova L.V. The influence of the fiber flax harvesting management on the yield and quality of flax products. Agrarnyi vestnik Urala = Agrarian Bulletin of the Urals, 2009, no. 9, pp. 62–63. (In Russian).
3. Pozdnyakov B.A., Rozhmina N.Yu. Priority directions of flax-growing modernization in the Russian Federation. Tekhnika i oborudovanie dlya sela = The Machinery and Equipment for Rural Area, 2015, no. 9, pp. 2–4. (In Russian).
4. Kovalev M.M., Kozlov V.P. Pressing devices of flax harvesting machines (design, theory, calculation). Tver: Tver Regional Book and Magazine Publishing House, 2002, pp. 64–122. (In Russian).
5. Pozdnyakov B.A., Velikanova I.V., Rozhmina N.Yu. Advanced technological scheme of production of fiber flax. Agrotekhnika i energoobespechenie = Agricultural machinery and energy supply, 2016, no. 2, pp. 61–65. (In Russian).
6. Puchkov E.M., Galkin A.V., Ushapovsky I.V. Current situations, problems and prospects with the specialized equipment provision of Russian flax production branch. Vestnik NGIEI = Bulletin NGIEI, 2018, no. 5. pp. 97–110. (In Russian).
7. Petrachenko D.A., Koropchenko S.P. Study of the dynamics of changes in the main quality indicators of the retted straw band of fiber flax. Molodoi uchenyi = Young Scientist, 2014, no. 10. pp. 189–191. (In Russian).
8. Rumyantseva I.T., Mochalov L.V., Soldatenko A.N. Features of varying properties of fretted straw during flax harvesting. Tekhnologiya tekstil'noi promyshlennosti = Textile Industry Technology, 2007, no. 6. pp. 49–52. (In Russian).
9. Popov R.A. Calculation of friction coefficients in the interaction of fiber flax stems with various materials. Dostizheniya nauki i tekhniki APK = Achievements of Science and Technology of AIC, 2006, no. 4. pp. 20–21. (In Russian).
10. Tarletsky A.G., Sizov I.V. Threshing and separating unit for flax harvester. Tekhnika i oborudovanie dlya sela = The Machinery and Equipment for Rural Area, 2017, no. 3, pp. 8–9. (In Russian).
11. Galkin A.V., Fadeev D.G., Uschapovsky I.V. Studying quality characteristics of flax fiber depending on deseeding device design. Vestnik Mordovskogo universiteta = Mordovia University Bulletin, 2018, vol. 28, no. 3, pp. 389–399. (In Russian).
12. Kruglenya V.A., Levchuk V.A., Tsayts M.V., Mazalovsky M.M. Studying quality of retted straw threshing in a flax primary processing line. Vestnik Bryanskoi gosudarstvennoi sel'skokhozyaistvennoi akademii = Vestnik of the Bryansk State Agricultural Academy, 2014, no. 3, pp. 69–72. (In Russian).
13. Sharshunov V.A., Kruglenya V.E., Alekseenko A.S., Levchuk V.A., Tsayts M.V. Study of a threshing device in the line of primary flax processing. Vestnik Belorusskoi gosudarstvennoi sel'skokhozyaistvennoi akademii = Proceedings of the National Academy of Sciences of Belarus, 2015, no. 3, pp. 112–117. (In Russian).
14. Sharshunov V.A., Alekseenko A.S., Tsayts M.V., Levchuk V.A. Analysis of devices for separating flax seeds from stems. Vestnik Belorusskoi gosudarstvennoi sel'skokhozyaistvennoi akademii = The Journal of Belarusian State Agricultural Academy, 2017, no. 4, pp. 174–180. (In Russian).
15. Tarlecki A.G., Medvedev Y.A. Justification of the choice of a threshing machine for a flax harvester. Trudy GOSNITI = Proceedings of GOSNITI, 2016, vol. 124, no. 1, pp. 167–170. (In Russian).
16. Kruglenya V.E., Tsayts M.V., Sentyurov P.D. Analysis of the application of the technology of mechanized harvesting of flax in the Republic of Belarus. Konstruirovanie, ispol'zovanie i nadezhnost' mashin sel'skokhozyaistvennogo naznacheniya = Design, Use and Reliability of Agricultural Machinery, 2013, no. 1, pp. 35–41. (In Russian).
17. Sharshunov V.A., Alekseenko A.S., Tsaits M.V., Levchuk V.A. Analysis of mechanized technologies for harvesting and primary processing of flax. Vestnik Belorusskoi gosudarstvennoi sel'skokhozyaistvennoi akademii = The Journal of Belarusian State Agricultural Academy, 2017, no. 2, pp. 137–141. (In Russian).
Review
For citations:
Burlakov Yu.V. Using the roller threshing device for threshing fiber flax. Siberian Herald of Agricultural Science. 2020;50(6):115-123. (In Russ.) https://doi.org/10.26898/0370-8799-2020-6-13
Views:
356
Email this article 